Hey!! tualatrix had setted up a Gloobus PPA!!!!!!!!! AMAZING!!
There is the last version (Including Source view and Freetype fonts preview)
https://launchpad.net/~tualatrix/+archive/gloobus/
So, to install gloobus from the ppa:
Add these lines to /etc/apt/sources.list
deb http://ppa.launchpad.net/tualatrix/gloobus/ubuntu jaunty main
deb-src http://ppa.launchpad.net/tualatrix/gloobus/ubuntu jaunty main
Then run add the key
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 0624A220
Update packages list
sudo apt-get update
Install gloobus-preview
sudo apt-get install gloobus-preview
sudo apt-get upgrade
(To upgrade to patched nautilus)
Finally, restart nautilus
nautilus -q
nautilus &
Well done! Hope to see your project implemented in Karmic before October.
I`m trying to install Gloobus for the first time, however I`m not sure about the upgrading Nautilus step.
Why is that? Is it going to download some sort of different nautilus from your PPA? That means that I`m not going to keep getting nautilus updates from the official ubuntu repos?
Thanks!
The nautilus in our PPA is the last nautilus version, but with just the space key modification. We’re going to patch every nautilus version so don’t worry cause our nautilus will be the same as the official 😉
In october there’s a new nautilus verision, and kitkat promised he will have the patch ready!
Dear Sir,
I’ve been installed Gloobus with the step on this post, i’ve installed succesfully.
There is one question, how can i activate the coverflow?
when i hit space key, they just preview the image/ text.
Regards
Coverflow isn’t in the repository yet, now there’s only the preview. Anyway, we are working in adding coverflow too. As soon as we have it I’ll post it 😉
thanks for the fast reply :).
This means I must be patient 🙂 . Btw thanks for this cool aplication, i hope it will be embed on next ubuntu release. Or even embed on gnome :).Thank you for this great application!
By the way, one more question, i’ve tried the gloobus coverflow i downloaded from here
http://jordihp.deviantart.com/art/Gloobus-0-4-123645797, ive been sucesfully installed it. how can i configure the shortcut for the cover flow?? like CTRL+space on gloobus preview?
It would be wicked cool to mix it with that PPA: http://davidsiegel.org/nautilus-simplified/
Vote for this 🙂
irrelevant comment: hadn’t read the forums in a while.sorry
I installed it using Ubuntu Tweak today, but it doesn’t work with space key.
Any way to make thi9s work without installing Nautilus?
Hey, there is a way to launch gloobus-preview without installing the parched nautilus, but then you need to do ctl+c and then crtl+space, its a good way but, with the parched nautilus is better!!
If you want to launch that with the ctrl+c and crl+space method follow these instrucctions:
Hope it works now!
Great man! I’ve been trying to make this work for a couple of months, and now it’s finally working! Thanks a lot and thank you very much for your great work!
Thanks dude!
Really happy that it works for you now 😉
Why I have to install these packages with gloobus: openoffice.org-common openoffice.org-core openoffice.org-style-human?
THX
Gloobus can preview office and openoffice files, to preview them I use unoconv application that depends on thos openoffice packages.
I haven’t found a better way to preview them, but if you don’t want to install those dependences, you can override them and don’t install the openoffice plugin.
If you are interested in this, tell me and I’ll support you in the installation 😉 however, if you know a better way to load openoffice and office documents, I would be really happy cause neither like using this unoconv app
THX for the attention. In fact, the problem is I’m using a «local variation» of openoffice.org, it’s broffice.org.
So when I try to install gloobus via apt-get, I have to unistall: broffice.org-debian-menus and install: openoffice.org-common openoffice.org-core
openoffice.org-style-human.
If I do this, my office suite do not work.
But I really want to use this useful application.
Perfect! I love gloobus, hope it gets included in nautilus by default soon.
One thing: could you teach gloobus to also render HTML?
Thanks
keep up the awesome work 🙂
I’ll try to teach gloobus about html, maybe using webkit 😛
I have the solution in portuguese here: http://ubuntued.info/2009/09/gloobus-um-software-para-prever-ficheiros.html
It’s a really useful application.
And about a integration with attachments in evolution?
[]
Love this man ! Awesome. It’s faster than a image viewer on my classmate PC 🙂
Thank! I’m glad you like it! 😉 It allows you to view a lot of files, try it with diferent kind of files and you’ll be amazed!
If you use the ppa tag, both apt and software-sources gui will automatically retrieve the key.
Que gran trabajo, me encanta, que lo pongan de serie pero ya.
Un saludo y enhorabuena
is there a karmic ppa on the way?
Of course!
Probándolo en Jaunty 😀
¡Muchas gracias por el programa!
Hola,
Tengo Gloobus+preview instalado y funcionando desde los repositorios + coverflow desde el paquete .deb y funciona de lujo salvo por un detalle… Cuando selecciono un archivo dentro de una carpeta determinada y abro el coverflow no me muestra los archivos de dicha carpeta, si no de cualquier otra. Es molesto porque yo, evidentemente, quiero que me abra los archivos de la carpeta en la que estoy en cuestión y no de otra.
¿Cómo puedo hacer para solucionar esto? No he visto ningón fichero de configuración ni nada por el estilo…
Gracias y un saludo.
Como haces para ejeutar el coverflow? utilizas nautilus actions?
Así es, lo abro desde nautilus actions.
y si pulsas un fichero y le das a coverflow que te hace? no te muestra todos los ficheros de la carpeta?
Me muestra todos los ficheros de «otra carpeta» de otro directorio, pero no de la que pulso. Abro las carpetas con una orden añadida al menú de nautilus (/usr/bin/gloobus) mediante nautilus actions, como te dije.
Has añadido la ruta de la carpeta despues de /usr/bin/gloobus?
deberia ser algo asi (no recuerdo exactamente)
/usr/bin/gloobus %d
Mira en este enlace como lo tengo puesto por favor…
http://yfrog.com/0agloobusp
No me había dado cuenta, el directorio que se me abre es el inmediatamente anterior al que se supone que quiero abrir. Es decir si tengo una carpeta llamada «imágenes» dentro de mi «home» y me sitúo en ella, al abrir cualquier archivo con coverflow se me abre la carpera «home» directamenre y no la de «imágenes», y así con todas las demás.
Esto pasa si no selecionas ningún fichero y lo haces directamente en la carpeta
prueba de selecionar un fichero y abrir el coverflow en este fichero (que este dentro la carpeta que quieres ver)
No, la acción de abrir con gloobus en el menú de nautilus actions solo me aparece cuando selecciono un fichero, si selecciono una carpeta ni siquiera aparece la opción.
how do i install it on karmic?
It isn’t tested in karmic yet…
I hope before its launched we can adapt it!
wow, this is what I’m looking for, Ubuntu with Mac taste
*still running apt-get install gloobus-preview
Thank you very much 🙂
just installed it on karmic with the patched nautilus and it runs like a dream. No problems whatsoever here, once again great work, just like with covergloobus.
Thaaaaaanks!
With Karmic, it’s easy to add the Gloobus-ppa: sudo add-apt-repository ppa:tualatrix/gloobus
I install it yesterday at my Karmic Desktop with the nautilus patch, but one problem occur, the nautilus can’t show my desktop background with my selected image.
I select at image as the desktop background, after a few minutes, it will change to a plain colour.
Umf.. this is very strange, you’re the first one to report it, it may be due some other thing.. cause our nautilus version only adds the space shortcut to launch gloobus..
Antes que nada felicitaciones por el trabajo Jordi Hernández!! 😉 Por comentarios veo que es algo increíble.
Claro, digo por comentarios porque no puedo hacerlo funcionar en mi Karmic Koala 😦 .. Instalo «gloobus-preview», reinicio nautilus pero la tecla espacio ejecuta el programa predeterminado para abrir el archivo en cuestión (Gedit, Visor de imágenes, etc)
¿Alguna idea?
Has hecho el dist-upgrade ?
El dist-upgade no actualiza nada pero ahora pude comprobar que la instalación se realiza correctamente y el programa funciona. El único problema es que no puedo lanzarlo con la barra espaciadora.
Lo puedo ejecutar desde las acciones de nautilus, bajé e importé la siguiente (está posteada en un comentario del blog): http://www.pierissimo.ilbello.com/files/config_180480be-dd6a-4bd1-8300-85ea28beb911.schemas
¿Habrá alguna forma de que pueda ejecutarlo con la barra espaciadora desde nautilus?
Gracias por responder y felicitaciones nuevamente Jordi 😉
Okay, «CTRL+C and CTRL+Space» open Gloobus-preview. Not’s the best choice but is the best I could do.
The question now is how can i launch Gloobus with Coverflow effect? I did try to install this package (http://jordihp.deviantart.com/art/Gloobus-0-4-123645797 [gloobus_0.4_i386]) but i have a dependency «libclutter» with «upper» version that requeired by the package.
————————————————————————————
Esto solo me pasa a mí, renegando con mi escaso nivel de inglés me acuerdo después de haber escrito eso de ahí arriba, que en este blog escribes en castellano -.-
Creo que quedó claro, no puedo instalar el paquete que trae el Coverflow porque una de sus dependencias está instalada en una versión posterior en mi Ubuntu =/
¿Algún salvavidas? Quiero tener el programa corriendo en mi Ubuntu, si es posible con la tecla «espacio»..
Saludos.-
In launchpad answers page there is a full description on how to install gloobus-coverflow and gloobus-preview, check that out and let me know if worked for you
hey jordi!
Muy buen trabajo! Espero que esto venga en futuras versiones de ubuntu y gnome! realmente muy bueno y facil.
Queria hacerte una consulta, como hago para que funcione el coverflow con un tecla, como lo hace con espacio en el preview y si se puede hacer funcionar de tal manera que abriendo un coverflow pueda abrir el otro archivo tambien en coverflow desde el mismo coverflow.. espero que se me entienda jeje.. pero seria como sustituir casi al nautilus. Pones el coverflow y le das enter para abrir el archivo, espacio para el preview o el otro boton para abrir el otro archivo en coverflow, cerrando el anterior coverflow!
Muy buen trabajo y felices fiestas!
Saludos desde Lima, Peru.
y una ultima cosa… se podria hacer que el coverflow no vea los archivos ocultos, osea los que tienen el punto, porque asi cada vez que abro mi carpeta home se me abren muchas carpetas y archivos que no me interesan ver.
Mucha suerte y disculpa lo largo del comentario
mm.. se me ocurrio una cosa mas, la opcion de que con el click derecho en el coverflow se vea el preview y con el doble click se abra la carpeta en coverflow y el archivo tambien, ya que por ahora no funciona con enter… o si se puede hacer funcionar?
te pido mil disculpas por el coment enorme esta muy bueno tu proyecto y me gustaria ayudar, como no de programacion solo puedo con eso.
suerte!
Tried to install on karmic from tualatrix’ ppa but it won’t work.
nautilus has been upgraded but no changes (ie I don’t get the ‘simplified’ nautilus and preview doesn’t work).
I had these error message during install :
Paramétrage de gloobus-preview (0.4.1-1ubuntu2) ...
g_module_open() failed for /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-psd.so: /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-psd.so: cannot open shared object file: No such file or directory
g_module_open() failed for /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-xcf.so: /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-xcf.so: cannot open shared object file: No such file or directory
and gloobus-preview package contains only :
└─(12:21 $)─> dpkg -L gloobus-preview
/.
/usr
/usr/share
/usr/share/doc
/usr/share/doc/gloobus-preview
/usr/share/doc/gloobus-preview/changelog.Debian.gz
/usr/share/doc/gloobus-preview/copyright
/usr/share/doc/gloobus-preview/changelog.gz
works with an older package version : gloobus-preview_0.4.1-0~ppa12_i386.deb
[…] Para usuarios novatos, un tutorial paso a paso de como instalar Gloobus en Ubuntu […]